The
WAEISO3L is similar
to the WAEISO3 but with a total length of 60cm so that it can go installed
behind the LCD screen. For advise customers to opt for the shorter WAEISO3 that can be easilly installed within the base of laptops without extensive disassebly.

The approximate length is just short of 24 inches / 60 cm terminated with a U.FL connector. A U.FL connector is the standard on the majority of mini-pci wireless cards. Those include 802.11 a , b , g , n and combinations as well as Bluetooth cards.

This is an omni-directional 3dBi gain antenna using a dipole design. This signal sensitivity is superior to most of the other case antennae cables that are placed behind the LCD. Gain results will vary depending on Mini-PCI slot location, slot cover material, or Case Routing.

The antennae cables should be placed as far as possible one from the other for better reception results. The antennae should be better hold in possition but having isolated PCB means that they require less space to position.

Avoid contact of the rubber end with heat sources.

Industrial grade antennae, performance as good or superior to the standard laptop inbuild ones.

ATT: Most of the new 11n miniPCI cards will need 3 antennae to fully reach their connection and range potentials.