The WAEISO3L is similar to the
WAEISO3 but with a total length of 60cm so that it can go installed
behind the LCD screen. For advise customers to opt for the shorter WAEISO3 that
can be easilly installed within the base of laptops without extensive
disassebly.
The approximate length is just
short of 24 inches / 60 cm terminated with a U.FL connector. A U.FL connector is
the standard on the majority of mini-pci wireless cards. Those include 802.11 a
, b , g , n and combinations as well as Bluetooth cards.
This is an omni-directional
3dBi gain antenna using a dipole design. This signal sensitivity is superior to
most of the other case antennae cables that are placed behind the LCD. Gain
results will vary depending on Mini-PCI slot location, slot cover material, or
Case Routing.
The antennae cables should be
placed as far as possible one from the other for better reception results. The
antennae should be better hold in possition but having isolated PCB means that
they require less space to position.
Avoid contact of the rubber
end with heat sources.
Industrial grade
antennae, performance as good or superior to the standard laptop inbuild
ones.
ATT: Most of the
new 11n miniPCI cards will need 3 antennae to fully reach their connection and
range potentials.
Can adjust to other connectors or
cable lengths for OEM projects
Product datasheet:
PDF
